How to Replace Samsung Galaxy Tab 3 7.0 SM-T210 Digitizer/Screen Replacement guide

The Samsung Galaxy Tab 3 7.0 was released in the second half of 2013, which is a cheaper and slightly smaller version of Tab 3 8.0. If your Tab 3 7.0 is still working fine with only a broken digitizer and you don’t have the budget to upgrade it with the new version. The most economical way is to replace the cracked screen/digitizer. Here we’ll walk you through a step by step guide of how to replace the Samsung Galaxy Tab 3 7.0 digitizer.

Tools Needed:

Step 1:

Remove the battery door.

Step 2:

Remove 4 screws as shown in the picture.

Step 3:

Disconnect the battery clip and then remove the battery.

Step 4:

Insert a plastic pry tool to release the rear housing.

Step 5:

Undo 2 screws as shown

Step 6:

Disconnect and remove the headphone jack.

Step 7:

Disconnect the 5 connectors.

Step 8:

Undo the 7 screws on the motherboard then release it.

Step 9:

Remove the screw and then the antenna.

Step 10:

Use tweezers to remove the loud speaker module.

Step 11:

Use tweezers to pick up the rear camera.

Step 12:

Use tweezers to pick up the plastic bracket.

Step 13:

Remove the front facing camera with the proximity sensor.

Step 14:

Remove the power button flex cable.


 

Summary
Review Date
Reviewed Item
Very useful article
Author Rating
5
1star 1star 1star 1star 1star

 

  1. BY Very Cool
    |

    Very Cool, do you guys can fix a cracked samsung s6 edge ?

LEAVE A REPLY TO Very Cool

©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!