How to Replace Samsung Galaxy Tab 3 7.0 SM-T210 Digitizer/Screen Replacement guide

The Samsung Galaxy Tab 3 7.0 was released in the second half of 2013, which is a cheaper and slightly smaller version of Tab 3 8.0. If your Tab 3 7.0 is still working fine with only a broken digitizer and you don’t have the budget to upgrade it with the new version. The most economical way is to replace the cracked screen/digitizer. Here we’ll walk you through a step by step guide of how to replace the Samsung Galaxy Tab 3 7.0 digitizer.

Tools Needed:

Step 1:

Remove the battery door.

Step 2:

Remove 4 screws as shown in the picture.

Step 3:

Disconnect the battery clip and then remove the battery.

Step 4:

Insert a plastic pry tool to release the rear housing.

Step 5:

Undo 2 screws as shown

Step 6:

Disconnect and remove the headphone jack.

Step 7:

Disconnect the 5 connectors.

Step 8:

Undo the 7 screws on the motherboard then release it.

Step 9:

Remove the screw and then the antenna.

Step 10:

Use tweezers to remove the loud speaker module.

Step 11:

Use tweezers to pick up the rear camera.

Step 12:

Use tweezers to pick up the plastic bracket.

Step 13:

Remove the front facing camera with the proximity sensor.

Step 14:

Remove the power button flex cable.


Review Date
Reviewed Item
Very useful article
Author Rating
1star 1star 1star 1star 1star


  1. BY Very Cool

    Very Cool, do you guys can fix a cracked samsung s6 edge ?


©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!