How do you solve the problems of fast power consumption, lagging, and heating on cell phones?

Using cell phones today has become part of our daily lives. However, we will encounter various problems when using the phone; this article mainly introduces the solutions to four kinds of cell phone use.

 

  Situation 1: cell phone dead

 

There are many different cases of dead phones. The situation is not the same, and the processing method will naturally be different.

 

  Cause analysis.

 

1. too many programs running in the background, taking up too much running memory, overloading the system, and causing the system to be stuck or even dead.

 

 

2. A mobile phone virus was caused by the crash.

 

 

3. The purchased SD card is not compatible with the phone, and when reading it, it crashes due to errors.

 

 

4. Too many programs are running in the background, causing the phone's CPU temperature to be too high.

 

 

5. When the phone is running in the background, there are errors in various data operations.

 

 

6. There are a lot of bugs in the ROM, causing the phone to crash frequently.

 

  Solution.

1. Press and hold the power button for 10 seconds to perform a mandatory shutdown (slightly different models), or install "Application Manager" to shut down background programs.

 

 

2. Install cell phone antivirus software to regularly clean up the memory and antivirus.

 

 

3. Delete the useless software on the SD card or format it. (If neither of them works, try replacing the SD card with a new one.)

 

 

4. Shorten the time to play large games, and remember to heat the phone when it is hot.

 

 

5. You can patch or upgrade the ROM; the easiest is to directly brush the machine.

 

Situation 2: The phone power consumption fast

 

Cause analysis.

1. too many background-running programs, especially some very stubborn self-starting software. The system was always self-starting, resulting in constant power consumption.

 

 

2. Many people are unaware that the phone screen, which is always at its brightest, consumes a lot of power. Because it needs to repeatedly close or open the screen, this is more than always open and increases power consumption.

 

 

3. Cell phone charging is virtual power, or drinking quality milk tea, or capacity is reduced.

 

 

4. The phone has a leakage fault.

 

  Solution.

1. Close the background program; you can install the application housekeeper, isolate the frozen application, stop its self-start, and prohibit its background running in the case of non-use.

 

 

2. Dim the phone screen a little, preferably to suit you.

 

 

3. Use the phone's original charger, which can effectively provide the phone's battery storage capacity.

 

 

5. Use a universal meter to test whether your phone is broken, to facilitate timely replacement and repair.

 

  Situation 3: The body is hot and hot when charging/using

 

The phone is the same as the computer; when working, the CPU will generate a certain amount of heat, but the phone itself has no heat dissipation, only through its shell dissipation. So the phone body is slightly hot (a normal phenomenon), but if the phone's heat is excessive, you should be cautious.

 

  Cause analysis.

1. Long-term exposure to high temperatures

 

 

2. The phone is too hot because it has too many background programs running and too much CPU load.

 

 

3. The phone case purchased is too thick, resulting in poor heat dissipation of the phone.

 

 

4. If you use the phone in a place with a bad signal, the phone will increase the transmitting power so that the more it heats up, the worse the signal will be.

 

 

6. Improper brushing and the system itself have problems, causing the phone to heat up.

 

  Solution.

1. Avoid putting the phone in a hot environment for too long; pay attention to timely heat dissipation, such as placing it in a cool environment.

 

 

2. Close the background program so that self-starting software can take the application manager, use its isolation function, and isolate frozen applications.

 

 

3. Avoid using a phone case that is too thick and has poor heat dissipation.

 

 

4. Avoid using the phone in places where the phone signal is poor.

 

 

5. If the heat is serious after brushing, it is recommended to brush again.

 

 

6. Remove the phone case, touch the phone with your hands to confirm whether the phone battery or phone circuit board heating is more serious, and then prescribe the right medicine.

 

 

7. If it is not an integrated machine, you can take off the battery back cover and use forced cooling or an electric fan to blow. It is recommended to remove the phone case and then heat dissipate if it is an integrated machine.

 

 

7. When listening to songs or watching videos, the phone overheats more seriously; immediately return to standby mode.

 

  Situation 4: Insufficient phone memory/phone lag

 

Cause analysis.

 

1. The phone is poisoned.

 

 

2. Too many background programs are running.

 

 

3. Using cell phone software, browser cache data is too much garbage.

 

 

4. There is too much information stored inside the phone and too much software installed.

 

 

5. Deleting the software is not enough; the phone still has a stubborn application that we cannot see.

 

  Solution.

 

1. Install antivirus software.

 

 

2. Go to the phone settings (application management) and close the exit that is still running in the background program, while cleaning up the program cache data.

 

 

3. Open the browser, go to Settings, and then "Clear Data" to clear the junk cache.

 

 

4. Go to the phone settings, and applications, and install, uninstall, or move third-party software to the SD card.

 

 

5. Use cloud storage to free up storage space on your phone.

 

 

6. If the above methods are used, or prompted by insufficient memory, then directly back up the data and restore factory settings.