How to Repair A Cracked / Broken Xperia Z2 Screen
BY May | August 21st, 2014 | 4 | 3
Although the Sony Xperia Z2 is made of IPS LCD capacitive touch screen and protected by shatter proof glass, accidents result in cracked or broken screen still happen. While send it to the repair shop may not be so affordable for every single person, and if you’re good at DIY, fix the screen yourself can be a better choice.
In this tutorial guide, we’re going to show you how to DIY replace a damaged Xperia Z2 screen. This guide can be applied on following circumstances: dead pixel LCD display, faulty touch screen or smashed glass.
What you need are: Sony Xperia Z2 screen replacement part, hair dryer or heat gun, case opening tools, tweezers, Phillips screwdriver, spudger tool and confident!
1. Heat up the edges of back cover with hair dryer. [caption id="attachment_7567" align="alignnone" width="500"] Heat up the edges of back cover[/caption] 2. Pry up the back cover with spudger tool. [caption id="attachment_7570" align="alignnone" width="500"] Pry up the back cover[/caption] 3. The back cover and LCD Assembly are separated. [caption id="attachment_7591" align="alignnone" width="500"] The back cover and LCD Assembly[/caption] 4. Undo the 6 screws to release the motherboard and loud speaker assembly. [caption id="attachment_7571" align="alignnone" width="500"] Undo the 6 screws[/caption] 5. Pry up the vibrating motor, then take out the loud speaker assembly. (Notice: be careful not to damage the underneath flex ribbon.) [caption id="attachment_7590" align="alignnone" width="500"] Pry up the vibrating motor, then take out the loud speaker Assembly[/caption] 6. Pry up the battery flex connector, then pry up the battery gently. (Notice: be careful not to break the battery.)RECOMMENDED PARTS
- For Apple iPhone X OLED Screen and Digitizer Assembly with Frame Replacement - Black - Grade S+
- For Apple iPhone 8 Plus LCD Screen and Digitizer Assembly with Frame Replacement - Black - Grade S+
- For Apple iPhone 7 Plus LCD Screen and Digitizer Assembly with Frame Replacement - Black - Grade S+
- For Apple iPhone 6S Plus LCD Screen and Digitizer Assembly with Frame Replacement - Black - Grade S+
you left out the battery… Battery is glued to the frame with an insanely strong adhesive. Underneath the battery there are the delicate flex cables.
You can destroy the lcd either by damaging the cables or while pulling out the battery… The most important part is left out…
Battery Back Panel Glass Cover was broken and i need to replace it
Hey Hassan, you can check the part here: http://www.etradesupply.com/sony-xperia-z2-battery-door-black-with-sony-logo-only.html
Great tutorial!! Thanks a lot