How To Reassemble Samsung Galaxy S6 Edge

After completely tearing down the Samsung Galaxy S6 Edge, here we walk you through how to reassemble it again step by step.

 

 

Tools Needed:

• A Pair of Tweezers
• PH00 Philips Screwdriver

 

Step 1: Reassemble the Galaxy S6 Edge Charging Port Assembly.

▪ Connect the two RF antenna signal cables to the charging port assembly.

▪ Put the charging port assembly back into the slot.

▪ Fasten the 2 screws.

 

 

Step 2: Replace Small Components In The Front Housing.

▪ Replace the Galaxy S6 Edge’s ear speaker with proximity sensor.

▪ Reassemble the Galaxy S6 Edge’s vibrating motor.

▪ Remember to replace the proximity sensor’s metal cover.

 

 

 

Step 3: Replace The Galaxy S6 Edge Battery.

▪ Paste some 3M adhesive or double-sided adhesive before installing the battery, be careful not to damage the flex ribbon and connector.

 

 

Step 4: Reassemble The Galaxy S6 Edge Motherboard.
shoes factory

▪ Replace the Galaxy S6 Edge’s rear facing camera and microphone into the logic board.

▪ Reconnect the 4 flex connectors: battery, screen, charging port and motherboard flex connectors.

▪ Re-install the front facing camera and connect the ear speaker connector.

 

 

 

 

Step 5: Replace Small Components In The Rear Housing.

▪ Replace the power button and flex into the slot.

▪ Replace the volume button and flex back into the slot.

▪ Replace wireless charging coil, and be careful not to damage the fragile flex ribbons.

 

 

 

Step 6: Reassemble The Galaxy S6 Edge’s Rear Housing and LCD Assembly.

▪ Reassemble the rear housing and LCD assembly.

▪ Fasten the 13 screws in the rear housing.

 

 

 

Step 7: Reassemble The Galaxy S6 Edge’s Battery Door.

 

 

Step 8: Replace The SIM Card Tray.

 

 

Good Job! You’ve reassembled your Galaxy S6 Edge.