How to Disassemble/Tear Down/Take Apart iPhone 6

Tools Needed:

Screwdriver

Plastic Spudger Tool

TweezersCase Opening Tool

Suction Cup Tool

iPhone 6 Disassembly

 1. Power off the Apple iPhone 6.

1. Power off the Apple iPhone 6.

2. Undo the 2 charging port screws. (Notfefeice: there're lots of different screws inside, mark when disassembling in case of confusion.)

2. Undo the 2 charging port screws.

3. Use the suction cup tool and case opening tool to separate the LCD assembly from rear housing assembly. (Notice: be careful not to break the flex ribbons.)

IMG_9763

3. Use the suction cup tool and case opening tool to separate the LCD assembly from rear housing assembly.

4. Undo the 5 screws that locking the metal cover above LCD and Digitizer flex ribbon connectors.

4. Undo the 5 screws that locking the metal cover above LCD and Digitizer flex ribbon connectors.

IMG_9771

6. The iPhone 6 LCD assembly and rear housing assembly are separated.

6. The iPhone 6 LCD assembly and rear housing assembly are separated.

7. Undo the 3 screws of home button bracket.

7. Undo the 3 screws of home button bracket.

8. Pry up the home button flex ribbon connector, gently poke the home button and take it out.

8. Pry up the home button flex ribbon connector, gently poke the home button and take it out.

9. Undo the 2 screws that locking the metal cover above ear speaker and front facing camera.

IMG_9779

9. Undo the 2 screws that locking the metal cover above ear speaker and front facing camera.

10. Remove the front facing camera and the ear speaker.

10. Remove the front facing camera and the ear speaker.

11. Undo the 6 screws that locking LCD frame and LCD back plate.

11. Undo the 6 screws that locking LCD frame and LCD back plate.

12. Use tweezers to pick up the flex cable and remove the LCD back plate.

12. Use tweezers to pick up the sticker and remove the LCD back plate.

13. Separated LCD assembly, metal plate and rear housing assembly.

13. Separated LCD assembly, metal plate and rear housing assembly.

14. Undo the 2 screws that locking the metal cover above battery connector and loud speaker connector.

IMG_9800

 14. Undo the 2 screws that locking the metal cover above battery connector.

15. Pry up the connectors.

IMG_9803

 15. Pry up the connectors.

16. Use an eject pin or the tweezers to poke and take out the SIM card tray.

IMG_9813

 16. Use an eject pin or the tweezers to poke and take out the SIM card tray.

17. Undo the 2 screws that locking the metal cover above power button flex connector and volume button flex connector.

17. Undo the 2 screws that locking the metal cover above power button flex connector and volume button flex connector.

18. Undo the 10 screws that locking the motherboard. (Notice: there’re 2 screws under the black small part.)

18. Undo the 10 screws that locking the motherboard.

19. Pry up the power button flex connector and volume button flex connector.

19. Pry up the power button flex connector and volume button flex connector.

20. Undo the screw on the top of iPhone 6.

20. Undo the screw on the top of iPhone 6.

21. Remove the motherboard.

21. Remove the motherboard.

22. Undo the 2 screws that locking the metal cover above the rear facing camera, then remove the camera.

IMG_9854

22. Undo the 2 screws that locking the metal cover above the rear facing camera, then remove the camera.

23. Undo the 3 screws and take out the loud speaker.

IMG_9861

23. Undo the 3 screws and take out the loud speaker.

24. Undo the 3 screws that locking the earphone jack.

24. Undo the 3 screws that locking the earphone jack.

25. Undo the 4 screws that locking the charging port.

25. Undo the 4 screws that locking the charging port.

26. Undo the 2 screws and remove the vibrating motor.

IMG_9878

26. Undo the 2 screws and remove the vibrating motor.

27. The iPhone 6 disassembly had been finished.

27. The iPhone 6 disassembly had been finished. 



  1. BY Elias Kebede
    |

    Thank you a very important info. you gave to us

  2. BY man
    |

    thx sir

    • BY Kaye
      |

      hope it helped.

  3. BY oumed
    |

    Dear sir how to dismantle the battery?

  4. BY Hagai
    |

    while you did remove the ear speaker, you did not remove the front camera flex.
    is the metal cover on the earspeaker the same one who’s protecting the front camera or are there 2 different metal covers?

    • BY May
      |

      It’s the same metal cover. The camera flex is under the metal cover, while the earspeaker is under the front camera flex.

LEAVE A REPLY TO Elias Kebede

©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!