- Compatible With: Galaxy S4 SCH-I545,Galaxy S4 SPH-L720,Galaxy S4 SCH-R970
-
For Samsung Galaxy S4 SCH-I545/R970/L720 LCD Screen and Digitizer Assembly with Front Housing Replacement - White - With Logo - Grade A
This item inludes these following Parts:
1. LCD Display;
2. Touch Screen;
3. Front Housing.
Note: Please test the functionality before installation.
Specifications:
Size: 5.0 inches
Color: White
Type: Super AMOLED capacitive touchscreen, 16M colors
Resolution: 1080 x 1920 pixels (~441 ppi pixel density)
Protective Material: Corning Gorilla Glass 3
Compatibility: Samsung Galaxy S4
Features:
● This Galaxy S4 replacement screen is brand new and with high quality.
● This Samsung Galaxy S4 screen replacement is available in black and white. This is the white one.
● This Galaxy S4 LCD assembly is branded with logo on the top.
● This replacement screen assembly is compatible with all Samsung Galaxy S4 Series.How to Install/Tips:
1. Please choose the right part before placing an order.
2. Special repairing tools are required for assembling or disassembling, as the Samsung Galaxy S4 LCD and Digitizer Assembly is hermetically attached.
3. Handle the vulnerable and fragile flex cable ribbon carefully.
4. Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
5. The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.Steps
1. Power off the Galaxy S4, then remove the back cover and battery.
2. Use Small Phillips Screwdriver to release the 9 screws on the rear housing.
3. Take out the loud speaker assembly.
4. Put the case opening tool into the screen S4 display assembly and the middle frame to release the clips around the edge. Then use Tweezers to open the clip inside the battery compartment. Now you can remove the S4 middle frame.
5. Use case opening tool to disconnect the 9 connectors, and pick out the antenna.
6. Insert the case opening tool to loosen the adhesive on the USB board carefully. Pick out the USB port metal shield with the help of Tweezers.
7. Use case opening tool to gently remove the USB cable which is adhered to the front housing by strong double-side adhesive. Then take out the USB port board.
8. Undo 2 screws on the motherboard to release the board and remove it.
9. Use Tweezers to pick out the head phone jack, front facing camera and its metal shield, proximity sensor flex cable, ear speaker andvibrating motor. Now only left the broken S4 screen assembly with frame.
10. Get a new replacement screen display with frame for SGS4. Install the vibrating motor, earpiece, proximity sensor cable back on the S4 display assembly and front housing.
11. Assemble the front facing camera, the metal shield head phone jack.
12. Install the motherboard to the S4 LCD assembly with frame, and connect all the connectors.
13. Reinstall the charging port cable, the metal shield, the antenna. Then use 2 screws to fasten the motherboard.
14. Install the rear housing and the loud speaker assembly. And fasten them with 9 screws.
15. Put on the S4 battery and battery cover, and turn on the device to make sure it works as normal.
-
Customer also bought