Loading...
- Home »
- HTC »
- HTC One Series »
- HTC Droid DNA »
-
For HTC Droid DNA LCD Screen and Digitizer Assembly with Front Housing and Light Guide Replacement - Grade S+
Specification:
Screen Size: 5.0 inches
Display Type: Super LCD3 Capacitive Touchscreen, 16M colors
Resolution: 1080 x 1920 pixels, 441ppi pixel density
Connector Type: Clip
Material: Corning Gorilla Glass 2 (Screen) or Plastic (Front Housing)
Version: Verizon
Compatibility: HTC Droid DNA
Country of Origin: China
Features:
This HTC Droid DNA screen replacement consists of the LCD Screen Display, Digitizer Touch Panel, Front Housing and Light Guide.
The Version logo "Verizon" printed on the middle part of the front housing.
This HTC Droid DNA replacement screen is 100% original brand new which can make your phone a fresh and new look.
This replacement screen for HTC Droid DNA is made of the Corning Gorilla Glass 2 with premium craftsmanship.
HTC Droid DNA LCD Screen and Digitizer Assembly front side upper part
HTC Droid DNA LCD Screen and Digitizer Assembly rear side bottom part
How to Install / Tips:
The flex cable ribbon of the HTC Droid DNA replacement screen is very sensitive and is easily damaged. Handle carefully.
The installation of this HTC Droid DNA replacement part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
-
(5)5 StarsReviewed by Jonath**Rating
The LCD assembly worked perfectly and was fairly simple to install. I would however, suggest you purchase the ear piece speaker - it is NOT included in this assembly. I found out the hard way when I put the phone back together only to realize I could not hear people unless using the loud speaker or headset. This should really be noted in the product description as this part is advertised as front assembly and the speaker is not meant to be removed from the old screen assembly.
Reviewed by Rob**RatingAbsolutely perfect as usual
Reviewed by ry**RatingAfter spending weeks without a phone I finally decided to bite the bullet and buy a replacement screen for my droid dna. It came quickly and was packaged very well. The install was a HUGE pain, every little circuit board and cable must be removed in order to reach the lcd housing and much of the phone is held together by adhesives.
After finally putting it all back together, everything worked great. A few days later I noticed that the digitizer made a clicking sound when pressed towards the lower half of the screen. Upon closer inspection, I found that the digitizer was not properly glued to the housing and sits about a millimeter above it. Notice how in this picute: https://www.dropbox.com/s/mhn5w2ghloifybi/IMG_2143.jpg you can see two bluish lights, and in this second picture: https://www.dropbox.com/s/4hr36xd3zgkpgb3/IMG952144.jpg They are no longer visible because I am pressing the digitizer back into the housing.
Even if I were to get a replacement screen, I run the risk of breaking paper thin ribbon cables and I will also have to replace the $12 screen protector that I just applied.
Overall I am very disappointed in EtradeSupply's quality control and inspection.Reviewed by Rad**RatingPerfect! Quick delivery and everything works fine!
-
Customer also bought
-
(Posted on 05/29/14)The Ear Piece Speaker is only $1.00. My suggestion to Etrade Supply would be to include it in the assembly