- Home »
- Apple »
- Apple iPhone »
- Apple iPhone 6 »
-
For Apple iPhone 6 Digitizer Frame Replacement - Black - Grade S+
Notice:This item include hot melt!
Specification:
Color: Black
Material: Polycarbonate (PC)
Condition: OEM
Compatibility: For iPhone 6
Features:
• This item is not includes screws.
• This item is available in two colors: White and Black.
How to Install/Tips:
• The digitizer frame is assembled tightly. Special tools and skills are needed to replace this part.
• Please ensure to choose the right color before purchasing.
• The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.1.Separated LCD assembly, metal plate and rear housing assembly.
2.Undo the 2 screws that locking the metal cover above battery connector and loud speaker connector.
3.Pry up the connectors.
4. Use an eject pin or the tweezers to poke and take out the SIM card tray.
5.Undo the 2 screws that locking the metal cover above power button flex connector and volume button flex connector.
6.Undo the 10 screws that locking the motherboard. (Notice: there’re 2 screws under the black small part.)
7.Pry up the power button flex connector and volume button flex connector.
8.Undo the screw on the top of iPhone 6.
9.Remove the motherboard.
10.Undo the 2 screws that locking the metal cover above the rear facing camera, then remove the camera.
11.Undo the 3 screws and take out the loud speaker.
12.Undo the 3 screws that locking the earphone jack.
13.Undo the 4 screws that locking the charging port.
14.Undo the 2 screws and remove the vibrating motor.
16.The iPhone 6 disassembly had been finished.
-
Customer also bought
Perfect