4 ways to solve the intermittent touch failure of IPhone 13 screen

Recently, many netizens have reported that the IPhone 13 screen touch failure, sometimes playing and playing suddenly no response, but most of the time it is in a normal state. IPhone 13 intermittent failure what's going on, is the phone broken or their own improper operation, currently sorted out several reasons and solutions, see if you can help everyone.

 

 

1.It may be that the mobile phone system is stuck and the screen is not sensitive, try to restart the solution to solve it.

 

a.Press and hold either volume button and the side button until the power-off slider appears.

 

b.Drag the slider, then wait 30 seconds for your device to turn off. If your device is frozen or unresponsive, force restart your device.

 

c.To turn your device back on, press and hold the side button (on the right side of your iPhone) until you see the Apple logo.

 

2.It may be that the mobile phone body is too hot, hot will make the Apple mobile phone become stuck, it is recommended not to use the mobile phone for the time being, put the mobile phone in a cool place, and wait for the temperature to return to normal use, it is best to avoid letting the mobile phone in a high temperature state

 

 

3. It may be that the system has not upgraded the latest version of Apple, generally Apple mobile phones are automatically upgraded by default, some Apple users will manually turn off this option on the phone, resulting in Apple mobile phones not upgraded to the latest system, each upgrade of the system is to fix bugs, no upgrading may cause IPhone 13 intermittent screen touch failure

 

a.Go to Settings > General > Software Update.

 

b.Tap Automatic Updates, then turn on Download iOS Updates.

 

c.Turn on Install iOS Updates. Your device automatically updates to the latest version of iOS or iPadOS. Some updates might need to be installed manually.

 

4.a. If the touch layer in the screen is shorted, the touch layer can be replaced separately without changing the entire screen.

 

(1) Separate the TP layer from the whole screen through screen separation equipment and technology.

 

(2) Clean up the touch debris on the LCD screen after separation.

 

(3) Re-press the new TP layer on the LCD screen, and put the whole screen into the deaerator for vacuum treatment.

 

 

 

b. Motherboard touch chip, inter-board middle column chip, CPU or board layer circuit short circuit

 

(1) Short-circuit chip or line is measured through the universal meter clamp.

 

(2) Then the separation plate layer is heated by the fan, and then the chip transplantation, repair welding and flying wire are repaired

 

 

If you have any other questions, please leave a message