- Compatible With: SM-N910R4
-
For Samsung Galaxy Note 4 SM-N910R4 Middle Plate Replacement - Grade S+
Specifications:
Material: Plastic
Compatibility: Samsung Galaxy Note 4 SM-N910R4
Features:
This Galaxy Note 4 Middle Plate is a brand new and original replacement.
This Galaxy Note 4 housing replacement includes the ear speaker mesh cover, it does NOT include the ear speaker or any other small components.
This middle plate replacement is compatible with Samsung Galaxy Note 4 SM-N910R4
How to Install / Tips:
Please choose the right part before placing an order.
Special repairing tools are required for assembling or disassembling the Samsung Galaxy Note 4.
Handle the vulnerable and fragile flex cable ribbon carefully.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Samsung Galaxy Note 4 Middle Plate Disassembly Tutorial Guide:
1. Remove the Galaxy Note 4 Battery Door.
Power off the device;
Pull out the S Pen stylus;
Pull the battery door out through the small gap between the power button and the battery door.
2. Remove the Galaxy Note 4 Battery.
3. Remove the Galaxy Note 4 Rear Housing.
Undo the 16 screws in the rear housing;
Insert the case opening tool to take off the rear housing.
(Notice: The loudspeaker assembly is located in the rear housing and difficult to remove.)
4. Remove the Galaxy Note 4 Rear Housing Small Parts.
Remove the Earphone Jack.
Remove the Power Button and Volume Button.
(Notice: The loudspeaker assembly is located in the rear housing and difficult to remove.)
5. Remove the Galaxy Note 4 Motherboard.
Pry up the 4 connectors;
Undo the screw;
Remove the upper portion of main board and pry up the connector.
6. Remove the Galaxy Note Cameras.
Pry up the front facing camera connector;
Pry up the front camera retaining bracket;
Pry up the connector to remove the back facing camera.
7 Remove the Galaxy Note 4 Small Parts.
Remove the vibrating motor with power button flex;
Remove the ear speaker with flex;
Remove the volume button flex;
Remove the 5 antenna chips.
(Notice: The 5 signal chips are different in shape, be careful not to place them in the wrong position when reassembling.)
8. Remove the Galaxy Note 4 Charging Port Assembly.
Pry up the 2 connectors;
Undo the screw;
Pry up the charging port assembly and then pry up the two connectors.
9. Remove the Galaxy Note 4 Middle Plate.
Heat up the LCD and Digitizer assembly for 2 minutes to soften the adhesive;
Insert the case opening tool to remove the middle plate.
-
Customer also bought