Loading...
- Home »
- OnePlus »
- All Models »
- OnePlus Two »
- Compatible With: OnePlus Two
-
For OnePlus Two LCD Screen and Digitizer Assembly Replacement - Black - Without Logo - Grade S+
This item includes the following parts:
1. LCD Screen;
2. Digitizer Touch Screen.
This item does NOT include Front Housing.
Notice: Please test the functionality of this item before installation!
Specifications:
Color: Black
Screen Size: 5.5 Inches
Resolution: 1080 x 1920 pixels (401 PPI)
Display Type: LTPS LCD Capacitive Touchscreen, 16M colors
Connector Type: Buckle
Material: Corning Gorilla Glass 4
Compatibility: OnePlus Two
Features:
This item includes the Digitizer Touch Screen and Glass Lens already attached. It doesn't include the Front housing.
This Oneplus Two LCD assembly is brand new original replacement, please do not confuse it with the brand new but NOT original Oneplus Two LCD assembly.
This part is produced and assembled in original manufacturer.
How to Install/Tips:
Please make sure you have chosen the right verion before placing order.
This part is tightly assembled with other parts, special tooling is required for assembly.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Step 1: Remove the back cover.
Power off the device.
Insert your fingernail into the opening slot on the bottom left side of the device, and run it around the edges to release the back cover.
Step 2: Remove the SIM card tray
Step 3: Release the rear housing.
Use Tweezers to remove the 6 black rubber caps and 1 white rubber cap.
Remove the 18 screws. Please place the screws in groups so as not to mix them up.
Gently pry up the rear housing to remove it.
Step 4: Pry up the flex connector to release the battery.
Step 5: Remove the cameras
Pry up the connector to release the back facing camera.
Pry up the connector to release the front facing camera.
Step 6: Pry up the charging port flex connector and then pop up the motherboard
Step 7: Release the charging port flex assembly.
Step 8: Pop out the loudspeaker assembly.
Step 9: Release the LCD assembly.
Heat up the device to soften the adhesive.
Use a suction cup tool to pull up the LCD assembly, insert the case opening tool and run along the edge to separate the LCD assembly from the frame.
Reassemble the Oneplus Two with a new screen replacement in reverse order, and then your done!
-
(Posted on 04/06/16)Verry Good Quality Replacement parts.