- Home »
- BlackBerry »
- Torch »
- BlackBerry Torch 9800 »
-
For BlackBerry Torch 9800 Digitizer Touch Screen with Adhesive Replacement - Black - Grade A
Specification:
Size: 3.2 inches
Color: Black/White
Type of Digitizer: Capacitive
Type of Flex Ribbon Connector: Plug-in
Product Features:
Equipped with Capacitive digitizer, Blackberry 9800 has a much better touch performance than many of its previous models. The Torch 9800 Digitizer flex cable ribbon stretches out from the right upper corner. There is a big piece of IC and several small pieces of IC attached on the flex ribbon.
Installation Notes:
When installing the Blackberry 9800 digitizer, the first step should be threading the flex ribbon through the hole on the front housing. During this process, you should thread the flex ribbon horizontally through the hole because the big IC is quite thick. Any improper handling angle or too much strength applied may cause damage to the component. The flex ribbon connector is also very fragile. When connecting the connector to the port on the LCD screen, it is also important to handle gently. The corners and the edges of the BlackBerry 9800 Digitizers are also very vulnerable.