- Compatible With: Apple iPhone 7 Plus
-
For Apple iPhone 7 Plus Battery Replacement - Grade S+
Specifications:
Type:Non-removable Li-Ion battery
NominalVoltage: 3.82V
Charge Voltage: 4.35V
Capacity: 2900mAh
Compatibility:iPhone 7 Plus
Features:
This battery replacement is compatible with Apple iPhone 7 Plus only.
This iPhone 7 Plus battery replacement is 100% original and brand new.
High capacity battery enables longer standby time.
The Apple Apple iPhone 7 Plus Battery is non-removable. You have to disassemble your iPhone 7 Plus to replace the battery.
For proper maintenance of a lithium-based battery, it's important to keep the electrons in it moving occasionally. Be sure to go through at least one charge cycle per month (charging the battery to 100% and then completely running it down).
How to Install / Tips:
Please choose the right part before placing an order.
Special tooling is required for the repair or replacement work.
The installation of this iPhone 7 Plus Battery should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Step 1 Remove LCD screen assembly
First we need to power off the phone, then unscrew 2 Pentalobe screws at the bottom.
1.Unscrew 2 Pentalobe screws.Next, we'd better heat up the screen assembly for a while before using the suction cup to separate the screen and rear housing assembly.
After a small gap between LCD screen assembly and rear housing assembly was generated, use a spudger to insert to cut the adhesives around the screen edges.
Till all the screen adhesives were cut off, then we're ready to separate the screen from the rear housing assembly.
Before taking the screen off, there are some connectors need to be disconnected. Undo these 3 tri-point screws holding the metal cover, remove it and release the front facing camera with sensor flex cable underneath.
Then undo these 4 little screws and remove the metal cover.
Now, we can release the digitizer and LCD display screen connectors.
Now time to take out the screen assembly.
Step 2 Remove batteryRemove taptic engine screws and the barometric vent (according to Apple) screws.
Then remove the barometric vent and disconnect the taptic engine connector so you can remove this vibrating motor.
Then all we left is taking out battery. Pull out 2 stripe of battery adhesives underneath and battery can be removed easily.
Battery removed!
If you want to check the whole iPhone 7 Plus teardown, Visit our Youtube Channel ETrade Supply. And if you need any iPhone 7 Plus spare parts, ETrade Supply provide you best products and service.
-
Reviewed by Arct** Te** Solutio** -Ca** Ma**Rating
Great quality!
Reviewed by Matth** Vel**RatingGood quality part, fully functional
Reviewed by HandyDokt** Gm** -Re** Feld**Ratinggood service
Reviewed by Jo** Kel**Ratinggreat quality and service
-
Customer also bought
Yet to check if it works but all packaged nicely. Thank you!