- Compatible With: Apple iPad Mini 3
-
For Apple iPad Mini 3 Digitizer Touch Screen Assembly with IC Board Replacement - Silver - Grade R
This item includes the following components:
1. Digitizer Touch Screen with Adhesive;
2. Digitizer IC Board;
3. Home Button Assembly;
4. Front Camera Frame.
Specifications:
Color: Silver
Screen Size: 7.9 inches
Screen Type: LED-backlit IPS LCD capacitive touchscreen, 16M colors
Protective Material: Oleophobic coating
Compatibility: Apple iPad Mini 3
Features:
This iPad Mini 3 Digitizer Assembly includes the components as mentioned above. Please do not confuse it with the iPad Mini 3 Digitizer Touch Screen replacement.
This iPad Mini 3 Digitizer Touch Screen Assembly is brand new but NOT original replacement. We can also supply the brand new original iPad Mini 3 Digitizer Assembly.
The Apple iPad Mini 3 Touch Digitizer Assembly is available in black, silver and Gold. This is the silver one.
This replacement screen is compatible with iPad Mini 3 only.
How to Install / Tips:
Please choose the right part before placing an order.
Special repairing tools are required for assembling or disassembling the Apple iPad Mini 3 Digitizer Touch Screen Assembly.
Handle the vulnerable and fragile flex cable ribbon carefully.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Work Before Disassembly:
Step 1. Please cover the shattered iPad mini 3 screen with transparent adhesive tape, which will protect your fingers from the tiny glass during the repair work.
Step 2. Shut off your iPad mini 3 before disassembly. (It may cause short circuit while your power is on during the repair work)
Disassembly Tutorial Guide:
1.Use the hair drier/heat gun to heat the iPad mini 3 edge up for 5 minutes to melt the adhesive. (Starts from the front part; both the glass and the metal back plate will be heated up, so please be careful when touching them)
2.Use the suction cup to pry up the panel a little bit and then insert a plastic opening tool to separate the digitizer from the rest part. (Much strength can be used here because the glass are adhered to the frame tightly)
3.Use the suction cup and opening tool to slide across the edges and pry up the panel slowly and carefully.
4.Open the panel and undo the 4 screws in the LCD.5.Remove 7 screws in the metal bracket.
6.Remove 4 screws in the mental bracket and 1 screw in the motherboard.
7.Remove the metal bracket and disconnect 4 flex cables connecting to the logic board. The digitizer, LCD screen and metal plate are now removed from the rear housing assembly. If you are trying to replace the broken iPad mini 3 digitizer, by here is what you all need to do.8.Pry up the 2 antennas connecting to the logic board.
9.Remove 3 screws in the left bracket.
10.Remove 4 screws in the right bracket.
11.Remove 6 screws in the charging port.
12.Remove the louder speaker modules in the bottom.
13.Disconnect 4 flex cables connecting to mother board and remove the front facing camera. (Notice: the front facing camera is fixed on the back housing by adhesive. The front facing camera flex cable is clipped in. Handle carefully and gently.)
14.Disconnect the sensor flex cable to the mother board.(Notice: the flex cable is clipped to the earphone jack flex cable.)
15.Pull out the charging port.
17.Pull out the earphone jack flex cable.
18.Undo 2 screws in the side key bracket.
19.Undo 2 screws in the power button bracket.
20.Remove the side key and power button. (Because the battery is fixed on the back housing tightly by strong adhesive. We do not recommend to remove it yourself.)
-
Customer also bought