-
For Samsung Galaxy S III SPH-L710 LCD Screen and Digitizer Assembly with Front Housing Replacement - Sapphire - Grade S+
The item includes:
1. LCD Screen;
2. Digitizer Touch Screen;
3. Front Housing;
4. Ear Speaker Mesh Cover;
5. Home Button;
6. Home Button Flex Cable Ribbon;
7. Navigator Flex Cable Ribbon;
8. Side Keys.
Notice: Please test the functionality of this item before installation.
Specifications:
Size: 4.8 inches
Type: Super AMOLED capacitive touchscreen, 16M colors
Resolution: 720 x 1280 pixels (~306 ppi pixel density)
Protection: Corning Gorilla Glass 2
Color: Sapphire
Version: For Sprint
Compatibility: Samsung Galaxy S III SPH-L710
Features:
This Samsung Galaxy S III SPH-L710 screen replacement is sapphire and we also supply white lcd assembly replacement, please note.
This Samsung SPH-L710 Sprint Version replacement is branded with Samsung logo on the top.
This Galaxy S3 SPH-L710 screen assembly is 100% OEM manufactured and assembled.
This part is only compatible with the Samsung Galaxy S III SPH-L710 Sprint Version.
This Galaxy S III SPH-L710 digitizer replacement includes the front housing, please do not confuse it with the Samsung SPH-L710 LCD Screen and Digitizer Assembly.
How to Install / Tips:
These parts are hermetically attached. Special tooling and skills are required for replacing this Samsung Galaxy S III SPH-L710 LCD screen assembly.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of the Galaxy S3 SPH-L710 LCD assembly should be done by a qualified person. ETS is not responsible for any damage caused during installation.
How to Disassemble Samsung Galaxy S3
Tools we need: Small Phillips Screwdriver
Safe Open Pry Tool
Tweezers
As usual, the first step you need to do is to turn off the phone and remove the battery door and battery.
Unscrew the 10 screws then take out the rear housing
Disconnect these 4 connectors showed in the picture
Use Safe Open Pry Tool to remove the loud speaker module
Remove a screw and the antenna connector
Take out the motherboard
Separate the rear camera and the motherboard
Use the Safe Open Pry Tool to pry up the SIM and SD card reader
Peel off the microphone gasket then unscrew a screw
Pick out the front camera
Pick out the Bluetooth antenna
Remove the ear speaker flex cable
Use Tweezers to pick out the vibrating motor
-
Customer also bought