How to Disassemble Samsung Galaxy S3

Many of guys wondering how to do a DIY repair for their broken Samsung Galaxy S3. Here we'd like to show you the way we did, do hope this article is helpful to you guys.

Tools we need:

Small Phillips Screwdriver

Safe Open Pry Tool


As usual, the first step you need to do is to turn off the phone and remove the battery door and battery.

Unscrew the 10 screws then take out the rear housing

Disconnect these 4 connectors showed in the picture

Use Safe Open Pry Tool to remove the loud speaker module

Remove a screw and the antenna connector

Take out the motherboard

Separate the rear camera and the motherboard

Use the Safe Open Pry Tool to pry up the SIM and SD card reader

Peel off the microphone gasket then unscrew a screw

Pick out the front camera

Pick out the Bluetooth antenna

Remove the ear speaker flex cable

Use Tweezers to pick out the vibrating motor

Find Samsung Galaxy S3 parts at

  1. BY sebastian

    Wich is antenna GSM? cause my cell phon have not good signal

LEAVE A REPLY TO sebastian

©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!