How to Disassemble/Tear Down the HTC One M8

Tools needed: Hair Dryer/Heat Gun, Tweezers, Cutter Knife, Metal Spudger Opening Tool, Plastic Case Opening Tools, Small Phillips Screwdriver and T5 Screwdriver. HTC One M8 Disassembly 1. Power off the HTC One M8. [caption id="attachment_6973" align="alignnone" width="300"]Power off the HTC One M8 Power off the HTC One M8[/caption] 2. Heat up the Top and Bottom Cover with a Hair Dryer or a Heat Gun. [caption id="attachment_6974" align="alignnone" width="300"]Heat up the Top and Bottom Cover with a Hair Dryer Heat up the Top and Bottom Cover[/caption] 3. Use a Cutter Knife to pry up the Top and Bottom Cover (please pay special attention during this process). [caption id="attachment_6976" align="alignnone" width="300"]Use a Cutter Knife to pry up the Top Cover Pry up the Top Cover[/caption] [caption id="attachment_6978" align="alignnone" width="300"]Use a Cutter Knife to pry up the Bottom Cover Pry up the Bottom Cover[/caption] 4. Undo 2 Screws with the help of T5 Screwdriver underneath the Top Cover then 4 Screws with Small Philip Screwdriver underneath the Bottom cover. [caption id="attachment_6977" align="alignnone" width="300"]Undo 2 Screws with the help of T5 Screwdriver underneath the Top Cover then 4 Screws with Small Philip Screwdriver underneath the Bottom cover Undo 2 Screws with the help of T5 Screwdriver[/caption] [caption id="attachment_6979" align="alignnone" width="300"]Undo 2 Screws with the help of T5 Screwdriver underneath the Top Cover then 4 Screws with Small Philip Screwdriver underneath the Bottom cover Undo 4 Screws with Small Philip Screwdriver[/caption] 5. Take out the SIM Card Tray and SD Card Tray with an eject tool or Tweezers. [caption id="attachment_6986" align="alignnone" width="300"]Take out the SIM Card Tray and SD Card Tray Take out the SIM Card Tray[/caption] [caption id="attachment_6988" align="alignnone" width="300"]Take out the SIM Card Tray and SD Card Tray Take out the SD Card Tray[/caption] 6. Separate the LCD Assembly and Rear Housing with the Cutter Knife. [caption id="attachment_6985" align="alignnone" width="300"]Separate the LCD Assembly and Rear Housing with the Cutter Knife Separate the LCD Assembly and Rear Housing[/caption] 7. Pry out the LCD Assembly with the Case Opening Tools and Metal Spundger Opening Tool. [caption id="attachment_6983" align="alignnone" width="300"]Pry out the LCD Assembly with the Case Opening Tools and Metal Spundger Opening Tool Pry out the LCD Assembly[/caption] 8. The LCD Assembly and Rear Housing are separated. [caption id="attachment_6990" align="alignnone" width="300"]The LCD Assembly and Rear Housing are separated LCD Assembly and Rear Housing[/caption] 9. Peel off the tapes with the Tweezers. [caption id="attachment_6991" align="alignnone" width="300"]Peel off the tapes with the Tweezers Peel off one tape[/caption] [caption id="attachment_6995" align="alignnone" width="300"]Peel off the tapes with the Tweezers Peel off the other tape[/caption] 10. Take out the Black Signal Cable with the Tweezers or the Case Opening Tool. [caption id="attachment_7000" align="alignnone" width="300"]Take out the Black Signal Cable with the Tweezers or the Case Opening Tool Take out the Black Signal Cable[/caption] 11. Pry up the 6 connectors with a Case Opening Tool. [caption id="attachment_6993" align="alignnone" width="300"]Pry up the 6 connectors with a Case Opening Tool Pry up the 2 connectors[/caption] [caption id="attachment_6996" align="alignnone" width="300"]Pry up the 6 connectors with a Case Opening Tool Pry up the other 4 connectors[/caption] 12. Peel off the Charging Port Flex Sticker and pry out the connector with the Tweezers. [caption id="attachment_7002" align="alignnone" width="300"]Peel off the Charging Port Flex Sticker and pry out the connector with the Tweezers Peel off the Sticker and pry out the connector[/caption] 13. Use the Tweezers to pry up the Blue Signal Cable. [caption id="attachment_7004" align="alignnone" width="300"]Use the Tweezers to pry up the Blue Signal Cable Pry up the Blue Signal Cable[/caption] 14. Pry up the two White Signal Cables on both upper and bottom parts. [caption id="attachment_7006" align="alignnone" width="300"]Pry up the two White Signal Cables on both upper and bottom parts Pry up the White Signal Cable on the upper part[/caption] [caption id="attachment_7008" align="alignnone" width="300"]Pry up the two White Signal Cables on both upper and bottom parts Pry up the White Signal Cable on the bottom part[/caption] 15. Use the Metal Spudger Opening Tool to pry up the motherboard and then the battery. [caption id="attachment_7009" align="alignnone" width="300"]Use the Metal Spudger Opening Tool to pry up the motherboard and then the battery Pry up the motherboard and then the battery[/caption] 16. Take out the Loud Speaker Assembly and Internal Top Cover. [caption id="attachment_7011" align="alignnone" width="300"]Take out the Loud Speaker Assembly and Internal Top Cover Take out the Loud Speaker Assembly[/caption] [caption id="attachment_7012" align="alignnone" width="300"]Take out the Loud Speaker Assembly and Internal Top Cover Take out the Internal Top Cover[/caption] 17. Pry up the 3 Connectors that connect LCD Assembly and Motherboard Flex. [caption id="attachment_7021" align="alignnone" width="300"]Pry up the Three Connectors that connect LCD Assembly and Motherboard Flex Pry up the 3 Connectors[/caption] 18. Pry up the Rear Facing Camera and then the Motherboard Flex. [caption id="attachment_7032" align="alignnone" width="300"]Pry up the Rear Facing Camera and then the Motherboard Flex Pry up the Rear Facing Camera[/caption] [caption id="attachment_7033" align="alignnone" width="300"]Pry up the Rear Facing Camera and then the Motherboard Flex Pry up the Motherboard Flex[/caption] 19. Pry up the Rear Facing Camera and Front Facing Camera Connectors. [caption id="attachment_7022" align="alignnone" width="300"]Pry up the Rear Facing Camera and Front Facing Camera Connectors Pry up the Camera Connectors[/caption] 20. Take out the Ear Speaker. [caption id="attachment_7023" align="alignnone" width="300"]Take out the Ear Speaker Take out the Ear Speaker[/caption] 21. Take out the Earphone Jack and the disassembly is finished. [caption id="attachment_7024" align="alignnone" width="300"]Take out the Earphone Jack Take out the Earphone Jack[/caption]
  1. BY west
    |

    thank you

    • BY kaye
      |

      Hope it helped!

LEAVE A REPLY

©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!