Apple phone accessories’ common failures and repair notes
BY ETrade Supply | 二月 14th, 2023 | 0 | 0
Failure and causes:
Failure of the earpiece on an Apple phone: 4, 4S, 5, 5S, 5SE, 6, 6P, and 6S. The accessories 6SP, 7, 7P, and 8P are all distinct. When used normally, are less prone to sustain harm. The sound is too small, which is the most likely problem and is brought on by listening to the internet for an excessive amount of time while being distracted by flying dust from cleaning or replacing cans. The wire connects the X, XR, XS, and XS MAX, and the earpiece itself is resistant to harm. The earpiece will malfunction if it is dropped, handled, submerged in water, or dismantled. At this point, the hardware must be upgraded.
Maintenance notes:
Only an earpiece replacement is possible for Apple phone versions below the 8P if the earpiece is defective. However, the earpiece part will be separated into two sorts of parts for models above 8P, including the X, XR, XS, and XS Max: a single earpiece, and an earpiece assembly (with line). The earpiece assembly (with line) needs to be replaced if both the earpiece and the line are damaged or if the earpiece is not broken but the line is damaged. However, after the replacement, the face unlocks function will not work, in which case the face unlock sensor accessories on the original line must be transferred to the new line to fix the issue. If only one earpiece is damaged, the single earpiece can be replaced.
Tail plug
Only an earpiece replacement is possible for Apple phone versions below the 8P if the earpiece is defective. However, the earpiece part will be separated into two sorts of parts for models above 8P, including the X, XR, XS, and XS Max: a single earpiece, and an earpiece assembly (with line). The earpiece assembly (with line) needs to be replaced if both the earpiece and the line are damaged or if the earpiece is not broken but the line is damaged. However, after the replacement, the face unlocks function will not work, in which case the face unlock sensor accessories on the original line must be transferred to the new line to fix the issue. If only one earpiece is damaged, the single earpiece can be replaced.
The tail plug itself or a difference in color, such as white, black, or gold. They are only split into black when numerous masters are changed. After installation, other hues are blended in but are not apparent. Many individuals are not aware of the protective iron ring to match the color change and the tail plug interface. If not, a quick check reveals that this iron ring will often be replaced when the rear shell is replaced.
Camera
The front-facing camera on an iPhone:
After the new front camera is replaced, the Apple XR, XS, and XS Max are the models to watch out for: Replace any newly fitted accessories, and make sure that everything is buffed to match; otherwise, the front camera won't work, which is just as terrible.
Apple cell phone rear camera:
Apple phone rear camera is divided into a single rear camera and dual rear cameras. The models are as follows.
① single camera 5S, 6, 6P, 6S, 6SP, 7, 8, XR
② dual camera 7P, 8P, X, XS, XS MAX
Apple rear camera common failures and detection methods:
Check the liner interface solder joints, after the solder joints of uneven size solder joints are not shiny.
The hard disk:
The hard drive is also known as expansion, such as the expansion of 16G to 64G, 128G, etc., expansion memory can extend the life of some older iPhone models.
Hard drive (64G/128G/256G): 6/6 plus universal, 6s/6s plus/7/7 plus universal.