What should I do if the iPhone screen is broken? How to change the screen?

What should I do if the iPhone screen is broken? How to change the screen?

  1. Prepare tools and parts   There are many mobile phone replacement and maintenance tools and parts for sale on the Internet, and we can buy them from the Internet or the electronic market. We are reminded that it is best to be cautious when purchasing mobile phone parts online.     Parts and things to buy:   Mobile phone screen, suction cup, 5-leaf clover screwdriver, standard Phillips screwdriver, mobile phone pry bar, blade (if your mobile phone screen is severely cracked and broken into a spider web, then it is recommended to buy a blade)   2. Shut down   Whether you're servicing an iPhone, iPad, iPod Touch, or any phone or tablet, it's common sense that you need to turn it off first. Press the power button to turn off the iPhone, and then we will start.   3. Remove the screws   Remove the two screws of the mobile phone. Here we need to use a 5-leaf clover screwdriver. The size of the two screws is the same, so there is no need to remember which screw corresponds to which hole.   Apple mobile phone screen replacement   4. Remove the damaged screen   Put the suction cup on the screen above the Home button and fix it. Next, hold the iPhone in one hand and the suction cup in the other, and suck the screen out forcefully. In this process, but too impatient, you need to slowly pull up the screen, especially pay attention to the place where the logic board is connected. There is a panel above the screen cable, and there are 4 screws on the panel, we need to use a screwdriver to remove them one by one. It should be noted that these screws are of different sizes, so it is best to mark them for later reassembly. Once all four screws have been removed, carefully remove the shielding panel and set it aside. To remove the next three cables, we need to use a crowbar tool. At this point the screen has all been removed.   Note: If your screen is severely broken, then you also need to use a blade to start from the place between the frame and the screen until the screen is lifted, and then use a mobile phone crowbar.   5. Replace the damaged screen   Connect the three connection cables from the new screen to the logic board of the iPhone. Reinstall the baffle and screws we removed earlier. Next, put the screen into the phone. Remember, don’t use brute force to put the screen into the phone. If possible, we can start from the top of the screen to ensure alignment.   6. Reinstall the screws at the bottom of the phone   In the same way, twist back the screws we unscrewed in the first step. The process is not difficult. The most difficult process is to remove the screen.   7. Quiz Screen   At this point we have completed the replacement. Next we need to test that the new screen works properly.

LEAVE A REPLY

©2016 ETrade Supply Blog All Rights Reserved

successSuccessfully submitted!
Thanks for your suggestion!