- Compatible with: Apple iPad Air 2
-
For Apple iPad Air 2 LCD Screen and Digitizer Assembly Replacement - White - Grade S+
This item contains the following components:
1. LCD Screen;
2. Digitizer;
Notes: Please test the functionality of this item before installation.
Specifications:
Color: White
Screen Size: 9.7 inches
Resolution: 1536 x 2048 pixels, 264 ppi pixel density
Display Type: LED-backlit IPS LCD, capacitive touchscreen, 16M colors
Protective Material: Scratch-resistant glass, oleophobic coating
Compatibility: Apple iPad Air 2
Features:
This iPad Air 2 LCD Assembly includes the LCD Display, Digitizer Touch Screen with Front Glass already attached.
This iPad Air 2 LCD and Screen Assembly replacement is brand new and original.
The Apple iPad Air 2 LCD Assembly is available in white and black, this is the white one.
This LCD Assembly is compatible with iPad Air 2 only.
How to Install / Tips:
Please choose the right part before placing an order.
Special repairing tools are required for assembling or disassembling as the Apple iPad Air 2 LCD Display and Digitizer Touch Screen are hermetically attached.
Handle the vulnerable and fragile flex cable ribbon carefully.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Following is a tutorial guide about how to disassemble iPad Air 2.
1.Heated the iPad Air 2 screen edge for 3 minutes to melt the adhesive, then pry up the screen with the suction cup tool and case opening tool.
2.After opening the iPad Air 2 LCD assembly, undo 3 screws and remove the metal bracket covering the flex cables.3.Undo 6 screws holding the antenna module and 3 screws in the metal bar.
4.Peel off the adhesive and undo the screw under the adhesive.
5.Undo 2 screws inside the bracket.
6.Disconnect the antenna, then remove the antenna module.
7.Disconnect the front facing camera flex cable and remove the front facing camera.
8.Disconnect the headphone jack flex cable.
9.Undo 2 screws in the headphone jack bracket.
10.Undo the screw under the bracket.
11.Remove the headphone jack flex cable assembly.
As the mother board is stuck to the back housing by strong adhesive, professional reparing skills are needed to remove the motherboard and battery. It's high risk and difficult, please note ETS is not responsible for any damage caused during your repair work.
-
(4)3.1 StarsReviewed by ku** hag**Rating
quality products
Reviewed by Jerm** Siemeri**Ratingexcellent
Reviewed by Ad** So**RatingPerfect
Reviewed by Nil** Broadhur**RatingQuality for this, as described was great, the package was delivered fast! Only item that is not included for this part is the home button and the associated adhesives. You must re-use your original home button and adhesives to hold it in place.
-
Customer also bought
exactly what i ordered.