- Home »
- Apple »
- iPad »
- Apple iPad Air 2 »
- Compatible with: Apple iPad Air 2
-
For Apple iPad Air 2 Digitizer Touch Screen Replacement - Black - Grade S+
Specifications:
Color: Black
Screen Size: 9.7 inches
Screen Type: capacitive touchscreen
Protective Material: Scratch-resistant glass, oleophobic coating
Compatibility: Apple iPad Air 2
Features:
This iPad Air 2 Touch Screen replacement includes the Digitizer with Front Glass already attached.
This iPad Air 2 Digitizer Touch Screen replacement is brand new and original.
The Apple iPad Air 2 Touch Digitizer is available in black and white. This is the black one.
This replacement screen is compatible with iPad Air 2 only.
How to Install / Tips:
Please choose the right part before placing an order.
Special repairing tools are required for assembling or disassembling the Apple iPad Air 2 Digitizer Touch Screen.
Handle the vulnerable and fragile flex cable ribbon carefully.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Following is a tutorial guide about how to disassemble iPad Air 2.
1.Heated the iPad Air 2 screen edge for 3 minutes to melt the adhesive, then pry up the screen with the suction cup tool and case opening tool.
2.After opening the iPad Air 2 LCD assembly, undo 3 screws and remove the metal bracket covering the flex cables.3.Undo 6 screws holding the antenna module and 3 screws in the metal bar.
4.Peel off the adhesive and undo the screw under the adhesive.
5.Undo 2 screws inside the bracket.
6.Disconnect the antenna, then remove the antenna module.
7.Disconnect the front facing camera flex cable and remove the front facing camera.
8.Disconnect the headphone jack flex cable.
9.Undo 2 screws in the headphone jack bracket.
10.Undo the screw under the bracket.
11.Remove the headphone jack flex cable assembly.
As the mother board is stuck to the back housing by strong adhesive, professional reparing skills are needed to remove the motherboard and battery. It's high risk and difficult, please note ETS is not responsible for any damage caused during your repair work.
If you want to know how to replace a digitizer only on an iPad, please refer to this article:
https://www.etradesupply.com/blog/how-to-repair-cracked-ipad-mini-screen/
-
Customer also bought