- Home »
- Apple »
- Apple iPhone »
- Apple iPhone 6S Plus »
- Compatible With: Apple iPhone 6S Plus
-
For Apple iPhone 6S Plus LCD Screen and Digitizer Assembly with Frame Replacement - Black - Grade A
This item includes the following parts:
1. LCD Screen;
2. Digitizer Touch Screen;
3. Front Frame;
4. Ear Speaker Mesh Cover.
5. 3d Touch Panel
Specifications:
Color: Black
Screen Size: 5.5 inches
Connector Type: Buckle
Resolution: 1080 x 1920 pixels (401 ppi pixel density)
Display Type: LED-backlit IPS LCD, capacitive touchscreen, 16M colors
Features:
This item includes the LCD screen, digitizer touch screen, front frame,3D touch layer and ear speaker mesh cover already attached.
This part is a A grade product, which is manufactured and assembled and high quality.
This part is only compatible with iPhone 6S Plus.
The iPhone 6S Plus LCD screen assembly is available in 2 colors: White, Black.
How to Install / Tips:
Please choose the right part before placing an order.
The flex cable ribbon is easily damaged. Handle carefully! When install the front camera flex assembly.
Special tooling is required when disassembling and reassembling the Apple iPhone 6S Plus LCD Screen and Digitizer Assembly.
The installation of any new parts should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Below is our easy step by step iPhone 6S Plus LCD screen assembly replacement guide for your reference:
1. Power off your iPhone 6S Plus.
2. Undo the 2 charging port screws, then apply heat around the edges of the screen to soften the adhesive underneath.
3. Use the suction cup tool to lift up a small gap in between, then insert a case opening tool.
4. Slide the case opening tool around the edges of the screen to slowly open the screen. Do not raise the screen up over 90 degrees as it will damage the flex ribbons.
5. Undo the 5 screws to release the metal bracket covering the flex ribbon connectors.
6. Disconnect the 3 connectors of screen flex ribbon, front facing camera flex ribbon and 3D touch flex ribbon to release the iPhone 6S Plus LCD and digitizer assembly.
7. Undo the 2 screws holding the home button bracket then remove it.
8. Disconnect the flex ribbon connector then apply some heat on the home button to soften the adhesive and remove it to release the home button.
9. Undo the 3 screws holding the front speaker metal bracket, then remove it to release the ear speaker underneath.
10. Heat up the front facing camera flex with proximity sensor flex and remove it.
11. Undo the 8 screws to release the metal plate.
12. Pry up the flex ribbon connector, heat up around the edges then gently pry up the 3d touch film from the attached screen.
More detail, visit our blog: How to Replace the iPhone 6S+ Screen in 8 mins (3D Touch layer disassembled)
-
Customer also bought
Fast shipment and great quality