- Home »
- Apple »
- Apple iPhone »
- Apple iPhone 6S Plus »
- Compatible With: Apple iPhone 6S Plus
-
For Apple iPhone 6S Plus Glass Lens with Frame Replacement - Black - Grade S+
Specifications:
Color: Black
Screen Size: 5.5 inches
Material: Glass
Compatibility: iPhone 6S Plus
Features:
● This iPhone 6S Plus glass lens with frame is a brand new original replacement. And each item goes through strict inspection before shipping out.
● The iPhone 6S Plus screen replacement includes the glass lens and digitizer frame. It does not have touch function.
● The iPhone 6S Plus glass replacement is available in black and white, this is the black one.
● This glass replacement is used for iPhone 6S Plus only. Please do not confuse it with other versions.
How to Install / Tips:
● Special repairing tools are required for assembling or disassembling the iPhone 6S Plus glass lens.
● Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
● The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Below is our easy step by step iPhone 6S Plus LCD screen assembly replacement guide for your reference:
1. Power off your iPhone 6S Plus.
2. Undo the 2 charging port screws, then apply heat around the edges of the screen to soften the adhesive underneath.
3. Use the suction cup tool to lift up a small gap in between, then insert a case opening tool.
4. Slide the case opening tool around the edges of the screen to slowly open the screen. Do not raise the screen up over 90 degree as it will damage the flex ribbons.
5. Undo the 5 screws to release the metal bracket covering the flex ribbon connectors.
6. Disconnect the 3 connectors of screen flex ribbon, front facing camera flex ribbon and 3D touch flex ribbon to release the iPhone 6S Plus LCD and digitizer assembly.
7. Undo the 2 screws holding the home button bracket then remove it.
8. Disconnect the flex ribbon connector then apply some heat on the home button to soften the adhesive and remove it to release the home button.
9. Undo the 3 screws holding the front speaker metal bracket, then remove it to release the ear speaker underneath.
10. Heat up the front facing camera flex with proximity sensor flex and remove it.
11. Undo the 8 screws to release the metal plate.
12. Pry up the flex ribbon connector, heat up around the edges then gently pry up the 3d touch film from the attached screen.
More detail, visit our blog: How to Replace the iPhone 6S+ Screen in 8 mins (3D Touch layer disassembled).
-
Customer also bought