- Home »
- Apple »
- Apple iPhone »
- Apple iPhone 6S »
- Compatible With: Apple iPhone 6S
-
For Apple iPhone 6S Battery Replacement - Grade S
Features:
The iPhone 6S Battery is non-removable and is not easily changed. You have to disassemble your iPhone to replace the battery.
This iPhone 6S battery replacement will NOT be shipped with the disassembly tools.
This replacement battery is compatible with iPhone 6S only. Please do not confuse it with other versions.
How to Install/Tips:
Keep the batteries out of direct heat.
Please properly dispose of your broken or useless batteries by dropping them off at a household hazardous waste (HHW) facility
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Tools Needed:
1. Tweezers
2. Spudger
3. PH00 Philips Screwdriver
4. Pentalobe screwdriver
5. Heat gun or Hair drier or an iSlack
Step 1:
Remove the pentalobe screws in the bottom and SIM card tray.
Step 2:
Use a hair drier or a heat gun to heat up the iPhone 6S's edges, then use a suction cup to separate the LCD screen assembly from the rest. Note: Apple uses some adhesive to bridge the gap between the LCD screen assembly and the back housing, fortunately, it's not a strong adhesive, but you need to pay attention to it so you don't pull up the screen with to much force and damage the flex cables connecting it to the motherboard.
Another way to remove the iPhone 6S LCD screen assembly is to use an iSlack, which promises that it won't damage the phone during the separation. Furthermore, the adhesive is no match for an iSlack tool.(Credit: iFixit)
use a islack to lift the LCD screen assembly.jpg
Step 3:
Remove the metal cover on the battery connector.
First, use a PH00 Philips screwdriver to remove the 2 Philips screws on the metal cover.
Secondly, use tweezers to remove the metal cover and a spudger to remove the connector connecting to the motherboard.
Step 4:
Remove the metal cover on the LCD screen Assembly's connectors, then disconnect the flex cables' connectors.
Firstly, A PH00 Philips screwdriver is needed to remove the screws and remove the metal cover.
Secondly, disconnect the connectors which is plugged into the iPhone 6S' motherboard. Note: different from the iPhone 6, there are 3 flex cable connectors only.
Step 5:
Remove the newly designed vibrating motor to make room to remove the battery.
First, use a PH00 Philips screw driver to remove 2 screws in the vibrating motor, then tweezers are needed to get the motor out of the iPhone.
Step 6:
Remove the battery.
Fortunately, Apple still uses the battery adhesive pull tabs. What we need to do is just pull out on the battery tabs to remove the adhesive.
Finally, we've remove the battery out of the iPhone 6S. It's easy to do but we do recommend an experienced DIYer to do the job, otherwise you may damage the device unexpectedly. If you have any questions, feel free to comment below or contact us at service@etradesupply.com. We will reply to you ASAP. You can also join our cellphone repair community to know more about the cellphone repair industry.
-
Customer also bought
the best quality
[ ETS Answer ] Thank you for your feedback and supporting!