- Compatible with: Apple iPad Mini 3
For Apple iPad Mini 3 LCD Screen Replacement - Grade S+
Screen Size: 7.9 inches
Resolution: 1536 x 2048 pixels, 324 ppi pixel density
Screen Type: LED-backlit IPS LCD
Compatibility: Apple iPad Mini 3
? This iPad Mini 3 Screen replacement includes the LCD Display only.
? This iPad Mini 3 LCD Screen replacement is brand new and original.
? This replacement screen is compatible with iPad Mini 3 only.
How to Install / Tips:
? Please choose the right part before placing an order.
? Special repairing tools are required for assembling or disassembling the Apple iPad Mini 3 LCD Screen.
? Handle the vulnerable and fragile flex cable ribbon carefully.
? Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
? The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Below is a tutorial about how to disassemble iPad Mini 3.
1.Use the hair drier/heat gun to heat up the iPad mini 3 edge for 5 minutes to melt the adhesive. (Starts from the front part; both the glass and the metal back plate will be heated up, so please be careful when touching them.)
2.Use the suction cup to pry up the panel a little bit and then insert a plastic opening tool to separate the digitizer from the rest part. (Much strength can be used here because the glass are adhered to the frame tightly.)
7.Remove the metal bracket and disconnect 4 flex cables connecting to the logic board. The digitizer, LCD screen and metal plate are now removed from the rear housing assembly. If you are trying to replace the broken iPad mini 3 digitizer, by here is what you all need to do.
8.Pry up the 2 antennas connecting to the logic board.
9.Remove 3 screws in the left bracket.
13.Disconnect 4 flex cables connecting to mother board and remove the front facing camera. (Notice: the front facing camera is fixed on the back housing by adhesive. The front facing camera flex cable is clipped in. Handle carefully and gently.)
If you want to know how to replace an LCD only on an iPad, please refer to this article:
(1)3.3 StarsReviewed by Muhamm** Daniy** Abd** Lat**Rating
item condition is not as expected...screen full of scratches even though the display work just fine.
[ ETS Answer ] Hello Muhammad Daniyal Abdul Latif,
Thanks for shopping on ETradeSupply
Very sorry to hear that. Each product has been inspected strictly before it shipped out. And our package is very safe. Really sorry to hear that there is scratches on the product. In this case, if the product can not be accept, would you please open an RMA process on our website and put some clear photos on the RMA, then our RMA officer will take care of your problem asap.
Really sorry for that.
Thanks and have a wonderful day.
Customer also bought
Mobile Accessories Recommended