-
For 983A Auto Dispenser Controller Digital Display Solder Paste Glue Dropper
Note: Price is for reference only, do not do the actual transaction, the specific contact: sales@etradesupply.com
Specifications:
Model: 983A
Manual or timer operation modes
Digital Display
Free to set 16 kinds of ways
Foot pedal controlled
Suck-back feature ensure no dripping
Designed for wide range of application as EFD, I&J Fisnar
Complete with an accessory dispensing kit
This unit need to be connected to air compressor (1.5HP or above):
Size: 23.5 x 15.6x 5.8cm
Timer mode dispensing time: 0.01-99.99 seconds
Timer mode cycle interval: 0.1-9.9 seconds
Manual mode dispensing time: Controlled by the foot pedal
Input voltage: 110V/220V
Internal voltage: 12V/24v
Air input: 10-100 psi
Air output: 1-80 psi
Technical parameters:
1. Dispensing type: Free to set 16 kinds of ways, with dispensing time display
2. Automatic Timing dispensing: 00.01S-99.99S
3. Manual timing dispensing: Can dispensing coating, lineation continuously
4. Minimum dispensing: 0.0001 ml
5. Dispensing time interval: 0.1-9.9S (automatic timing function)
6. Input voltage: 220V±10% 50 Hz/ 110V±10% 60 Hz(220V for Europe;110V for America, Canada and Mexico)
7. Internal voltage: 24V DC/ 12V DC
8. Input air pressure: 10-100pSi
9. Output air pressure: 1-80pSi
10. Overall dimension: 235*225*63mm
11. Net Weight: 2.2 Kg
How to use:
1. Power Switch: putdown light on shows “Onâ€, light off shows “Offâ€
2. Dispensing time display: Display setting time
3. Input air pressure governor: First pull out, Reversal is lower pressure, veering is the higher pressure
4. Barometer: display range: 0-100pSi
5. Vacuum control unit: Reversal is Vacuum pump back high, veering is the Vacuum pump back low
6. Testing button: During testing, it can replace the foot switch
7. Dispensing time dial code button: Display setting time, adopts add and subtract way 00.01S-99.99S
8. Time interval setting dial code button: Display setting time, adopts add and subtract way 0.1S-9.9S.
9. Dispensing output interface: Connect to dispensing needle cylinder.
10. Air pressure input interface: Connect to clean high pressure source
11. Dispensing way: 16 kinds of free way
12. The foot controller interface: Connect to foot switch
13. Power input socket
14. Fuse holder
-
Customer also bought