- Compatible With: SM-G920, SM-G920A, SM-G920V, SM-G920P, SM-G920R4, SM-G920T, SM-G920F
-
For Samsung Galaxy S6 Series Volume Button Flex Cable Ribbon Replacement - Grade S+
Features:
This is Galaxy S6 Volume Button Flex Ribbon replacement only. It does not include the Galaxy S6 Volume Buttons.
This Galaxy S6 Volume Button Flex Ribbon is a brand new original replacement.
How to Install / Tips:
Please choose the right part before placing an order.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
Special tooling is required when disassembling and reassembling the Galaxy S6 Volume Button Flex Cable Ribbon.
The installation of any new parts should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Samsung Galaxy S6 Teardown Tutorial Guide and Video:
Step 1: Take Out The SIM Card Tray.
Power off the Samsung Galaxy S6.
Use an ejector pin or tweezers to take out the SIM Card Tray.
Step 2: Take Apart The Battery Door.
Heat up the Samsung Galaxy S6's Battery Door.
Pull the battery cover up with a screen suction cup tool. (The battery door is stuck to the middle plate with some really strong adhesive, take your time to remove it)
Separate the battery door with a case opening tool.
Step 3: Release The Rear Housing.
Undo the 13 screws in the rear housing.
Heat up the LCD Assembly.
Separate the rear housing from the LCD Assembly with the help of a suction cup tool and case opening tool.
(Notice: be careful not to damage the wireless charging chip attached to the battery.)
Step 4: Remove The Case Buttons.
Remove the power button flex.
Remove the volume button flex.
Remove the Case Buttons. (Notice: the Galaxy S6 power button and volume buttons are compatible with each other.)
-
Customer also bought