OEM Samsung Galaxy S III SGH-T999 LCD Screen and Digitizer Assembly

OEM Samsung Galaxy S III SGH-T999 LCD Screen and Digitizer Assembly

Specification

Size: 4.8 inch

Resolution: 1280×720 pixels

Technique Principle: LED

Origin: South KoreaConnector: Clip

Product Feature & ETS Advantage

Product Feature:

The resolution of Samsung Galaxy S III SGH-T999 reaches to1280*720, and this Samsung T999 LCD and Digitizer Screen has the clearest and brightest show result in Sumsung. As a major component of Samsung T999, the Galaxy S III SGH-T999 LCD and Digitizer Touch Panel is very important. Any bleeding, color spots or dead pixels on the screen may cause display problem. The SGH-T999 LCD Screen and Digitizer has a resolution of 1280×720 pixels. It also has a flex ribbon used to connect the motherboard and the screen. The ribbon functions as a data transmitter. Without it the Samsung T999 may not work properly. Therefore, many function problem of the Galaxy S III SGH-T999 LCD Screen and Digitizer Assembly can be caused by the flex ribbon problem.

ETS Advantage:

ETrade Supplyhas established the ISO9001 certified QC procedure. For each Samsung Galaxy S III SGH-T999 LCD Screen and Digitizer Assembly, we apply strict cosmetic inspection and functionality test process before packaging and transportation. We also invent our own super-protective packaging method to give the maximum protection to the LCD Screen and Digitizer (visit our YouTube page www.youtube.com/etradesupply to watch our packaging video) . Apart from this part, ETrade Supply also supplies other replacement parts such as Samsung T999 Battery Door and Galaxy T999 Front Housing.

Purchasing & Installation Notes

The Samsung Galaxy S III SGH-T999LCD Screen and Digitizer Assembly is a fragile electronic component and can be easily damaged if improperly handled during the process of repair or replacement. ETS cannot be responsible for any possible damage caused by incorrect installation. When putting a lot of Samsung Galaxy S III SGH-T999 LCD Screen and Digitizer Assembly together, please try not to pile them up because too much pressure may cause damage to the digitizer. Also, please try to handle the repair or replacement work in dry environment without direct sunlight (the temperature should be kept between -20 ℃- to +70 ℃). Also, please keep the Galaxy T999 LCD and Digitizer Assembly away from acid, alkali or other corrosive materials.