- Compatible With: SM-N915 (International), N915T(T-mobile)
-
For Samsung Galaxy Note Edge SM-N915/Samsung-N915T LCD Screen and Digitizer Assembly with Front Housing Replacement - Black - With Logo - Grade S+
This item includes the following parts:
1. LCD Screen;
2. Digitizer Touch Screen;
3. Front Housing;
4. Home Button;
5. Ear Speaker Mesh Cover.
Please test the functionality of this item before installation.
Specifications:
Screen Size: 5.6 inches
Display Type: Super AMOLED capacitive touchscreen, 16M colors
Resolution: 1600 x 2560 pixels (524 ppi pixel density)
Color: Black
Compatibility: Samsung Galaxy Note Edge SM-N915 only
Installation Notes:
1. The edge of the Samsung Galaxy Note Edge SM-N915 replacement screen is fragile and vulnerable, DO NOT push too much strength on it, please handle carefully.
2. Small parts such as rear facing camera, front facing camera and vibrating motor on the orignal front housing should be transfered to the new replacement screen with front housing.
Follow the guide below to replace your Samsung Galaxy Note Edge screen assembly with front housing.
1. Remove the Galaxy Note Edge S Pen.
Power off the device;
Pull out the S Pen stylus.
2. Remove the Galaxy Note Edge Battery Door.
Pull the battery door out through the small gap between the power button and the battery door.
3. Remove the Galaxy Note Edge Battery.
4. Remove the Galaxy Note Edge Rear Housing.
Undo the 15 screws in the rear housing;
Insert the case opening tool to take out the rear housing.
(Notice: The loudspeaker assembly is located in the rear housing and difficult to remove.)
5. Remove the Galaxy Note Edge Motherboard.
Pry up the 5 connectors;
Release the upper portion of the motherboard;
Pry up the connector on the back of the board to release the bottom part of motherboard.
6. Remove the Galaxy Note Edge Charging Port Flex Assembly.
Pry up the 3 connectors;
Undo the screw;
Release the USB charger port flex assembly.
8. Remove Small Parts from the Galaxy Note Edge.
Remove the front facing camera;
Remove the proximity sensor;
Remove the ear speaker with power button flex;
Remove the vibrating motor;
Remove the earphone jack;
Remove the volume button flex.
(Notice: The power button and volume button are assembled in the front housing and not easily removed.)
The Galaxy Note Edge disassembly is now completed. Please note the front housing is attached to the Galaxy Note Edge LCD Touch Screen by a very strong adhesive, we do not recommend attempting to separate the frame from the LCD assembly, as it’s very difficult with a high risk of breakage. Thus, replace the cracked Galaxy Note Edge screen with a new one in reverse orders.
Features:
By using this Samsung Galaxy Note edge SM-N915 replacement screen with front housing, it will save you much precious time and effort for the repair work.
-
Customer also bought