-
For Samsung Galaxy Note 3 N900 LCD Screen and Digitizer Assembly with Front Housing Replacement - White - Grade S+
This Samsung Galaxy Note 3 N900 LCD Screen Assembly with Front Housing includes:
1. LCD Screen;
2. Digitizer Touch Screen;
3. Front Glass;
4. Front Housing;
5. Ear Speaker Mesh Cover;
6. Home Button;
7. Power Button;
8. Volume Button.
Notice:Please test the functionality of this item before installation.
Specifications:
Screen Size: 5.7 inches
Display Type: Super AMOLED capacitive touchscreen, 16M colors
Resolution: 1080 x 1920 pixels, 386 ppi pixel density
Color: White
Protective Material: Corning Gorilla Glass 3
Version: For Korea
Supported Models: Samsung Galaxy Note 3 N900
Features:
This item includes the LCD, digitizer touch screen, front housing and front glass already attached.
The Samsung Galaxy Note 3 N900 LCD Screen Assembly WITHOUT Front Housing and Samsung Galaxy Note 3 N900 Front Housing Only are also available. Please do NOT confused these three items.
This item is the Korea version and has a SAMSUNG logo only, do not confuse this with other versions as the items are not compatible.
This LCD Screen Assembly replacement for Samsung Galaxy Note 3 N900 is 100% OEM manufactured and assembled.
This Samsung Galaxy Note 3 N900 LCD screen assembly with frame is only compatible with the Samsung Galaxy Note 3 N900, please check your model before ordering.
How to Install / Tips:
These parts are hermetically attached, special tooling is required for assembly or disassembly.
The flex cable is very sensitive and is easily damaged. Handle carefully.
Be sure to choose the right color and version before placing an order.
Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Step 1: Power off the Galaxy Note III, then remove the back cover and battery.
Step 2: Use Phillips Screwdriver to undo these 12 screws securing the back housing and front housing.
Step 3: Take out the Note 3 Stylus/S pen
Step 4: Wedge the Spudger tool to the S pen place, then pry up the rear housing.
Step 5: Disconnect six cables connectors as well as the antenna connectors.
The six flex cable connectors cover the front-facing camera, proximity sensor, headphone jack, LCD, home button and charging.
Step 6: Remove the Note 3 motherboard.
Note: If you need to replace the cracked Galaxy Note 3 screen including the following components: front housing, charging port flex cable ribbon, front facing camera, earphone jack with ear speaker flex cable ribbon, signal wire and vibrating motor, then you can stop disassembly at this step and assembly the Note 3 by replacing the new Galaxy Note 3 screen and digitizer assembly with front housing.
But when you need to fix only the cracked Note 3 screen assembly without other components, then go ahead disassemble the following Note 3 inner parts.
Step 7: Take off the antenna connector at the bottom with the help of case opening tool.
Step 8: Release the charging port PCB board glued to the front housing by strong adhesive.
Step 9: Unscrew the screw securing the earphone jack and earphone, then take it out.
Step 10: Peel off the metal shield of front housing to lift up the front camera and proximity sensors.
Step 11: Pry out the vibrating motor gently with the Phillips screwdriver.
Step 12: Release the three small components.
Step 13: The whole Galaxy Note III screen assembly is released at this step.
We go ahead with assembling a new Samsung Galaxy Note III display assembly.
Step 14: Getting a new replacement part for the Galaxy Note 3 screen assembly with front housing.
Step 15: Install the vibrating motor with power button cable.
Step 16: Place the Note 3 front camera and proximity sensors to the front housing, then cover the cable with a metal shield.
Step 17: Put back the earphone jack with the earphone. After that, screw it with the note 3 front housing.
Step 18: Install the Note 3 charging port flex cable ribbon.
Step 19: Place the motherboard and buckle six connectors.
Step 20: Assemble the antenna by connecting two connectors.
Step 21: Insert the SIM card.
Step 22: Put back the back housing to the front housing and secure it with 12 screws.
Step 23: Place the Galaxy Note 3 battery and the back cover.
-
Customer also bought
great service and products