- Compatible With: Motorola Nexus 6
-
For Motorola Nexus 6 LCD Screen and Digitizer Assembly with Front Housing Replacement - Black - Without Any Logo - Grade S+
This item includes the following components:
1. LCD Display;
2. Digitizer Touch Screen;
3. Front Housing.
Notes: Please test the functionality of this item before installation.
Specifications:
Color: Black
Version: Without Carrier Logo
Screen Size: 5.96 inches
Resolution: 1440 x 2560 pixels, 493 ppi pixel density
Display Type: AMOLED Capacitive touchscreen, 16M colors
Protective Material: Corning Gorilla Glass 3
Compatibility: Motorola Nexus 6
Features:
This Motorola Nexus 6 LCD assembly replacement includes the LCD Screen, Front Housing, Digitizer Touch Panel and Front Glass already attached. We can also supply the Nexus 6 LCD Touch Screen without Frame.
This Motorola Nexus 6 Screen replacement is brand new and original.
How to Install / Tips:
Please ensure to choose the right part before placing an order.
The Motorola Nexus 6 LCD Screen and Digitizer are hermetically attached, special repairing tools are required for reassembly or disassembly.
Make sure to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Motorola Nexus 6 Disassembly Tutorial Guide:
Tools Needed
1. Hair Dryer / Heat Gun;
2. Tweezers;
1. Remove the Motorola Nexus 6 SIM Card Tray.
Power off the device;
Use an eject pin or tweezers to release the SIM card tray.
2. Remove the Motorola Nexus 6 Battery Door.
Heat up the battery door for 2 minutes to soften the battery door adhesive;
Insert the case opening tool and pry up the battery door.
3. Remove the Motorola Nexus 6 Rear Housing Assembly.
Undo the 22 screws in the rear housing as shown below;
Gently remove the rear housing assembly from the screen assembly.
4. Release the Connectors in the Rear Housing.
Remove the gasket on the rear housing near the bottom of the phone;
Carefully pry up the flex ribbon connector underneath;
Remove the gasket on the rear housing near the top of the phone;
Carefully pry up the flex ribbon connector underneath.
5. Release the Flex Cable Ribbon Extender.
Carefully pry up the latch on the flex connector to separate it from the flex ribbon extender.
6. Remove the Motorola Nexus 6 Battery.
Heat up the rear housing for 10 seconds to soften the battery adhesive;
(Notice: be more careful on this step as batteries might explode when overheated.)
Pry up the battery flex connector that adhered to the rear housing;
If you want to release the wireless charging coil as well, gently pry up the charging coil connector. However, we don’t recommend performing this step as you run a high risk of damaging the charging coil and battery.
7. Release the Motorola Nexus 6 Side Keys.
Undo the screw that locks the side key metal bracket;
Remove the side key flex cable ribbon.
8. Remove the Motorola Nexus 6 Motherboard.
Undo the screw and metal bracket that locks the front housing and main board;
Pry up the LCD flex connector and digitizer connector;
Remove the motherboard.
9. Remove the Motorola Nexus 6 Cameras.
Pry up the rear facing camera flex connector;
Remove the back camera;
Pry up the front facing camera flex connector;
Remove the front camera;
10. Remove the Motorola Nexus 6 Ear Speaker and Headphone Jack.
Remove the front speaker.
(Notice: be careful not to scratch the flex ribbon underneath.)
Remove the headphone jack.
(Notice: the headphone jack is strongly attached to the front housing with an adhesive.)
The Motorola Nexus 6 disassembly is now completed.
-
Customer also bought
Exactly per specifications, the screen came with one of the best packaging I ever witnessed.
So many foam slices, nothing could have happened to that screen!
Considering the time, shipping & service quality and, of course, the price (much better than the many other places I looked), this is more than a bargain, it's the best deal I ever got for an original part!
[ ETS Answer ] Thank you for your recognition of our products and services, we will do better in the future