Original Motorola Droid Razr XT910 LCD Screen and Digitizer Assembly with Front Housing

OEM Motorola Droid Razr XT910 LCD Screen and Digitizer Assembly with Front Housing

Specifications

Size: 4.3 inches

Type of Screen: Super AMOLED

Resolution: 960*540 pixels

Screen Color: 16M colors

Type of Flex Ribbon Connector: Clip

Product Features & ETS Advantage

Product Features:

The Motorola Droid Razr XT910 LCD Screen and Digitizer Assembly with Front Housing is thin with bright color. Compared with HTC One X, the 4.3 inches Moto XT910 LCD is a little bit smaller than that of HTC One X, 4.7 inches. But while the LCD screen and Touch panel of HTC One X can be separated, the digitizer and LCD screen of Razr XT 910 are pressed together, which helps reduce the thickness of the cell phone. The XT910 LCD is also thinner than iPhone 4 LCD. In addition, the XT910 Front Housing features the front speaker mesh cover, but has no Motorola logo. It has the gasket on the back. The front housing also features some side keys such as the volume keys but it is not sold with the power key and USB port cover.

ETS Advantage:

ETS maintains the most comprehensive inventoried product line in the Global Wireless repair parts marketplace. We have close contact to OEM manufacturer agents so as to guarantee a competitive price and the best quality.

ETrade Supply has established the ISO9001 certified QC procedure. For each Motorola Droid Razr XT910 LCD Screen and Digitizer Assembly with Front Housing, we apply strict cosmetic inspection and functionality test process before packaging and transportation. We also invent our own super-protective packaging method to give the maximum protection to the Motorola XT910 LCD Screen and Digitizer Assembly. Apart from this part, ETrade Supply also supplies other parts of Motorola Droid XT910.

Purchasing & Installation Notes

Purchasing Notes: Please note the difference between Motorola XT910 Digitizer Touch Panel and the Motorola XT912 Digitizer Touch Panel. The XT912 digitizer features the carrier logo while the XT910 digitizer does not.

Installation Notes: There is a small piece of iron sheet on the back of the Razr XT910 LCD Assembly used to fasten the assembly. Still, we need to handle carefully when installing the part. The flex ribbon is very short. So it is advisable to take special protective measure during installation.