- Home »
- Apple »
- iPad »
- Apple iPad Mini 4 »
- Compatible With: Apple iPad Mini 4
-
For Apple iPad Mini 4 LCD Screen and Digitizer Assembly Replacement - Black - Grade S+
This item contains the following components:
1. LCD Screen;
2. Digitizer Touch Screen.
This replacement screen does not include the front housing.
Notes: Please test the functionality of this item before installation.
Specifications:
Color: Black
Screen Size: 9.7 inches
Resolution: 1536 x 2048 pixels, 324 ppi pixel density
Display Type: LED-backlit IPS LCD, capacitive touchscreen, 16M colors
Protective Material: Scratch-resistant glass, oleophobic coating
Compatibility: Apple iPad Mini 4
Features:
• This iPad Mini 4 LCD Assembly includes the LCD Display, Digitizer Touch Screen with Front Glass already attached.
• This iPad Mini 4 LCD and Screen Assembly replacement is brand new and original.
• The Apple iPad Mini 4 LCD Assembly is available in white and black, this is the black one.
• This LCD Assembly is compatible with iPad Mini 4 only.
How to Install / Tips:
• Please choose the right part before placing an order.
• Special repairing tools are required for assembling or disassembling as the Apple iPad Mini 4 LCD Display and Digitizer Touch Screen are hermetically attached.
• Handle the vulnerable and fragile flex cable ribbon carefully.
• Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
• The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.1. Soften the iPad Mini 4 digitizer adhesive.
Adjust the hot plate temperature to 110 ~ 120 , place the iPad Mini 4 facedown on the hot plate for less than 10 seconds. If you're using a heat gun instead of the hot plate, set the heat gun at the same temperature, heat up around the edges of iPad Mini 4 in circles also for less than 10 seconds.
2. Release the iPad Mini 4 digitizer adhesive.
Gently pull up the screen, insert a guitar pick in between and run it around to separate the iPad Mini 4 LCD assembly from the rear housing assembly. It's not that easy as it sounds, pay your effort and patience to it.
3. Release the iPad Mini 4 LCD and digitizer assembly.
Undo the 4 screws and remove the metal cover, then pry up the two screen flex cable connectors to release the iPad Mini 4 LCD and digitizer assembly.
4. Release the iPad Mini 4 home button.
Gently pry up the 3 connectors and pry up to release the home button bracket. Then poke from the front side to release the iPad Mini 4 home button with flex cable ribbon.
-
Customer also bought
good service