- Home »
- Apple »
- Apple iPhone »
- Apple iPhone 6S Plus »
- Compatible With: Apple iPhone 6S Plus
-
For Apple iPhone 6S Plus LCD Screen and Digitizer Assembly with Frame and Small Parts (without Home Button) Replacement - Black - Grade S+
This item includes the following parts:
1. LCD Display with Metal Back Plate;
2. Digitizer Touch Screen with Glass Lens;
3. LCD Front Frame;
4. Ear Speaker with Metal Cover;
5. Front Facing Camera with Sensor;
6. Home Button Extension Flex Ribbon;
7. Heatsink Sticker.
Specification:
Compatible with: iPhone 6S PlusColors: Black
Screen Size: 5.5 inches
Resolution: 1080 x 1920 pixels (~401 ppi pixel density)
Protection: Ion-strengthened glass, oleophobic coatingFeatures:
-Brand new and original LCD with digitizer Assembly with Frame and Home Button replacement.
-Compatible with iPhone 6S Plus only.
-This complete LCD with digitizer here includes the LCD screen display, digitizer touch screen and front glass.
-It is used to replace your damaged/shattered/broken LCD with digitizer for iPhone 6S Plus while the LCD screen shows pictures with spots or lines which greatly affect your screen viewing, or the digitizer lose sensitivity so that you fails to execute your order.
How to Install / Tips:
1.Please choose the right part before placing an order.
2.Special repairing tools are required for assembling or disassembling, as the Apple iPhone 6S Plus LCD and Digitizer Assembly is hermetically attached.
3.Handle the vulnerable and fragile flex cable ribbon carefully.
4.Please try to handle the repair or replacement work in a dry and dust free environment without direct sunlight.
5.The installation of any new part should be done by a qualified person. ETS is not responsible for any damage caused during installation.
Below is our easy step by step iPhone 6S Plus LCD screen assembly replacement guide for your reference:
1. Power off your iPhone 6S Plus.
2. Undo the 2 charging port screws, then apply heat around the edges of the screen to soften the adhesive underneath.
3. Use the suction cup tool to lift up a small gap in between, then insert a case opening tool.
4. Slide the case opening tool around the edges of the screen to slowly open the screen. Do not raise the screen up over 90 degrees as it will damage the flex ribbons.
5. Undo the 5 screws to release the metal bracket covering the flex ribbon connectors.
6. Disconnect the 3 connectors of screen flex ribbon, front facing camera flex ribbon and 3D touch flex ribbon to release the iPhone 6S Plus LCD and digitizer assembly.
7. Undo the 2 screws holding the home button bracket then remove it.
8. Disconnect the flex ribbon connector then apply some heat on the home button to soften the adhesive and remove it to release the home button.
9. Undo the 3 screws holding the front speaker metal bracket, then remove it to release the ear speaker underneath.
10. Heat up the front facing camera flex with proximity sensor flex and remove it.
11. Undo the 8 screws to release the metal plate.
12. Pry up the flex ribbon connector, heat up around the edges then gently pry up the 3d touch film from the attached screen.
-
Customer also bought