Apple iPhone 4 Transparent LCD and Digitizer Assembly with Battery Door and Home Button (AT&T)

Apple iPhone 4 Transparent LCD and Digitizer Assembly with Battery Door and Home Button (AT&T)

Specifications

Size: 3.5 inch

Material: IPS

Resolutions: 960X640

Screen colors: 16.77 M

Type of Flex Ribbon Connector: Clip

Version: AT&T

Product Features & ETS Advantage

Product Features:

iPhone 4 owns 24% thinner frame than the iPhone 3GS,and the iPhone 4 adopts the retina display which features 3.5 inches and 960x640 pixels screen. Compared with iPhone 3GS, the 326 pixels retina display of iPhone 4 is four times as many as the iPhone 3GS, and iPhone 4 adopts 800:1 contrast ratio which is also greater than the iPhone 3GS.

This Apple iPhone 4 Transparent LCD and Digitizer Assembly with Battery Door and Home Button (AT&T) consists of the following components: LCD Screen, Digitizer Touch Panel, Battery Door and Home Button. Compared with iPhone 4 LCD and Digitizer Assembly with Frame(Verizon), the slots of digitizer frame of iPhone 4 LCD Screen and Digitizer Assembly is asymmetric, while the version’s slots are symmetric.

ETS Advantage:

Currently there is a couple of source of iPhone 4 LCD Screen Assembly in the market, such as disassembled from brand new, assembled with original LCD screen and touch panel by small factories, and assembled with original LCD and aftermarket touch panel. ETrade Supply offers the OEM brand new iPhone 4 LCD and Digitizer Assembly with Frame. We will have at least twice strict QC check on both cosmetic look and functionality in order to make sure our products are 100% good.

ETrade Supply has established the ISO9001 certified QC procedure. We also invent our own super-protective packaging method to give the maximum protection to the iPhone 4 Digitizer Assembly. Apart from this part, ETrade Supply also supplies other replacement partssuch as Apple iPhone 4 LCD Screen (AT&T).

Purchasing & Installation Notes

The flex cable ribbons of LCD screen and touch panel should be kept well. Any scratches or bend on the flex ribbons may lead to the dysfunction of display or digitizer.

Step 1. Please check if the Apple iPhone 4 LCD and Digitizer Assembly with Frame is damage when you receive it. We are 100% percent sure that our package is very good. But damages caused due to transportation are hard to avoid. So please check before signing for it.

Step 2. If there is no problem on cosmetic look, please test the function of digitizer touch panel and LCD screen before installation.

Step 3. If there is no problem on the function then you can start installation. Please be careful of the flex ribbons. Do not bend or squeeze them. ETS cannot be responsible for any possible damage caused by incorrect installation. Please try to handle the repair or replacement work in dry environment without direct sunlight (the temperature should be kept between -20 ℃- to +70 ℃).  Also, please keep the OEM Apple iPhone 4 LCD and Digitizer Assembly with Frame away from acid, alkali or other corrosive materials.